Emlid RS2 GNSS Receiver

₹198,000.00

Out of stock

Add to wishlist
Category: Tag:

Gets a fix
in seconds

Reach RS2 gets a fixed solution in just seconds and maintains robust performance even in challenging conditions. Centimeter accuracy can be achieved on distances up to 60 km in RTK, and 100 km in PPK mode.

GPS, GLONASS, BeiDou,Galileo, and QZSS

L1OF, L2OF, L1C/A, L2C,E1B/C, E5b, B1I B2I

PPP
support

RINEX raw data logs are compatible with PPP services so you can now get centimeter-precise results in any place on Earth. Process RINEX files in an online service and get position with absolute accuracy.

Built-in
3.5G modem

Reach RS2 features a power-efficient 3.5G HSPA modem with 2G fallback and global coverage. Now corrections can be accessed or broadcasted over NTRIP independently, without relying on Internet connection on your phone.

22 hours
on 1 charge

Up to 22 hours of autonomous work when logging data and up to 16 hours as a 3G rover, even in cold weather—no more need to carry spare batteries with you. Reach RS2 can charge from a USB wall charger or a power bank over USB-C.

Surveying
with ReachView

The easiest to use software for data collection that is available both for Android and iOS. With ReachView, you can collect and stakeout points and control all the features of Reach receivers, such as setting up a base station, logging RINEX data, and configuring NMEA output.

Point collection:
create projects, save points,
and export in industry
standard formats

Record each position as a point with centimeter-precise coordinates. Export projects and open them in GIS or CAD software like AutoCAD, ArcGIS, QGIS, and others.

Formats

DXF, CSV, GeoJSON, ESRI Shapefile

Stakeout:
Find the position of points on the ground

Stakeout is used to find exact physical locations of points. They can be collected in ReachView or imported from other CAD or GIS software.

The stakeout process in ReachView has two steps: map view and bulls-eye. Map’s purpose is to help you navigate to points on long distances. When you get closer than 40 cm to the point, bulls-eye turns on to make it easier for you to visually match the receiver and point.

Formats

CSV, DXF and GeoJSONs

Logging in RINEX:
record raw data, position, and base correction logs

Record raw data, position and base correction logs. Point collection and the recording of RAW data are independent processes and can be used simultaneously. ReachView has a simple and intuitive interface for logging configuration and control.

We provide our version of RTKLib for PPK. It’s free and can be downloaded from our docs.

16 GB

storage

160+ days

of logging at 1 Hz

PPP for Opus

RINEX raw data logs are compatible with PPP services so you can now get centimeter-precise results in any place on Earth. Process RINEX files in an online service and get position with absolute accuracy.

Connectivity

Real-time position streaming in NMEA

Reach provides data in standard NMEA that is used by most GIS apps. Simply connect your device to Reach over Bluetooth or with a cable, and turn on “Position output” in ReachView.

Reach can turn on and off automatically

Reach is able turn on and off in sync with an external battery connected over RS-232. This helps when the power button is hard to reach, for example, if the receiver is placed on the roof of a tractor.

Compatible apps

> MachineryGuide, AgriBus-Navi, Efarmer, Agripilot, and others

Position streaming

Interfaces

RS-232, TCP, Bluetooth

NTRIP or another Reach as a base station

Reach RS2 needs a base station as a source of corrections. That’s a requirement for centimeter accuracy in RTK and PPK. Base might be either another Reach RS2 receiver or an NTRIP service. VRS is also supported.

Reach RS2 works seamlessly with other Reach receivers over any link.

Input and output corrections

Interfaces
> TCP, LoRa, Bluetooth, RS-232, NTRIP

Formats

RTCM3

Max distance from a base

> Over 60 km in RTK
> 100 km in PPK
> Any place on Earth with PPP

Engineered to be tough
Reach RS2 is designed to work even in the most challenging environments

IP67

RS2 is waterproof up to 1 m depth. All connectors are completely sealed and protected from water and dust with silicone plugs.

-20ºС…+65ºС

We extensively tested Reach RS2 in conditions that simulate coldest winters and hottest summers.

Polycarbonate body

Polycarbonate, an extremely durable material that is used in bulletproof glass, makes Reach RS2 impact-resistant.

Related Products

Back to top