Your bag is empty
Don't miss out on great deals! Start shopping or Sign in to view products added.
Shop What's New Sign in
Airbots Surya Shakti 15L TC Agri Spraying Drone
₹650,000.00 excl. GST
- DC Input Voltage Range (V): 10-30
- Ac input voltage(V): 100-240
- Max output power(W): AC: 200W MAX, DC: 400W MAX
- Discharging Power (W): Balance port: 25W MAX (LiPo/6S), Main port: 5W
- Battery Type: LiPo/LiFe/LiIon/LiHV: 1-6cells, NiMH/NiCd: 2-15cells, Pb: 3S/6S/12S
SkyRC Q200 Neo AC/DC Multi-Function Smart Charger
₹12,599.00 excl. GST
- Input Voltage: 6~14S Lipo
- Continuous Current: 100A
- Peak Current: 120A
- BEC: No
T Motor Flame 100A 14S ESC
₹12,476.00 excl. GST
- DC Vibration Motor
- Rotation:? CW/CCW
- Voltage: 3V DC
- Load speed: 12,000rpm
DC Vibration Motor,7 mm Dia. , 25mm Length
₹89.00 excl. GST
- RS485/RS232 version
- Long Range: 100m@90% reflectivity, 40m@10% reflectivity
- Multi echo: 4 times
- Ambient Light Resistance: 100Klux
- Multi-interface compatibility, able to be used in many fields
- IP67 high-strength bodywork and high reliability
Benewake TF03 100m RS485/RS232 Industrial High-Speed Lidar
₹15,389.00 excl. GST
Mauch 090 ? 4-14S HYB-BEC / 12V-3A / 2x 20cm 24AWG
₹3,600.00 excl. GST
- 200A?? Current measurement sensor board, based on Allegro Hall Sensor ACS-200U.
- The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry? etc.
Mauch 075: HS-200-LV , 200A Sensor
₹4,450.00 excl. GST- Out Of Stock
Connects a Sensor Board to the SEN. port on a PL BEC, a Sensor Hub X2, a Sensor Hub X8, or a Power-CubeYou can also use this cable to retrofit your own BECMolex CLIK-Mate 1.25mm 4p on both ends / L = 150mmMauch 040: PL Sensor Cable
₹500.00 excl. GST 
- This sensor hub allows to connect two PixHawk Mauch current sensors in parallel in order to add their current capacities.
- The current of both sensors is summarized before reaching the flight controller while the voltage measurement of the LiPo packs are collected from both sensors and passed through the hub to the flight controller.
- The main purpose of this hub is to replace existing protection circuits and to monitor that both paralleled LiPos are supplying the same current to the system.
- Thanks to Mauch Sensor Hub X2, you can spot early when a LiPo starts to fail, way before this situation is irreversible.
- In case of difference in current is of +/- 15%, the alarm output goes ON in order to indicate the fault. The pilote should then land immediately in order to check the batteries.
Mauch 010: PL Sensor Hub X2-V2 with CFK enclosure for UAV/DRONES
₹5,050.00 excl. GST
- Color: Black
- Cylindrical shape with outer diameter of 20mm (?20) and a length of 570mm.
- Easy to use
- Good quality product
- Compatible with 22L Granule Spreader
EFT Landing Gear Aluminum Tube 20*570/Compatible with 22L Granule Spreader (2pcs)
₹1,329.00 excl. GST
- Type: Tilt T-Connector.
- Size: Designed for a 20-20 diameter connection.
- Compatibility: Designed to be compatible with various drone frames.
- Purpose: Facilitates assembly or connection of landing gear in drones across different models.
EFT Landing Gear T-Connector Tilt/20-20/Compatible with all Drone Frames (4pcs)
₹1,600.00 excl. GST
- Color: Black
- Cylindrical shape with a length of 265mm.
- Easy to use
- Good quality product
EFT Arm Aluminum Tube 40*37*265 Compatible with E410P/E610P/E416P (2pcs)
₹2,000.00 excl. GST
- Motor: Xrotor X6 Plus 2388 or 2480 180KV
- PropellerDiameter:? 23 inch
- ESC:? 80A FOC
- Supply voltage:? 12S
- Maximum take-off weight:? 25kg
- Wheelbase:? 1404mm
- Opening size:? 1495*1308*500mm
- Folding size:? 945*848*500mm
- Tank capacity:? 10L
- Frame weight:? 5kg
EFT E610P Agriculture Spraying Hexacopter Drone kit with Camera Mount
₹136,309.00 excl. GST
