Texas Instruments SN65HVD3082EDR – 5V Half-duplex RS-485 Transceiver ESD Protection 8-Pin SOIC
The Texas InstrumentsSN65HVD3082EDR is a low-power, half-duplex RS-485 transceiver designed to operate reliably in harsh, electrically noisy industrial environments. It translates standard logic signals into the differential signaling required for the RS-485 and RS-422 protocols, allowing for data transmission over long cables (up to 1200+ meters). This specific “E” variant features enhanced 15kV ESD protection on the bus pins and integrated failsafe circuitry to ensure a stable logic state even if the bus is idle, open, or shorted. The SN65HVD3082EDR is an industry-standard choice for power-sensitive networks like utility meters and building automation.
Features
Half-Duplex Communication: Optimized for 2-wire networks where nodes take turns transmitting and receiving data.
Superior ESD Protection: Bus pins are rated for up to ±15kV (HBM), reducing the need for external protection components in most designs.
Low Power Modes: Features an ultra-low 1nA shutdown mode and 0.3mA active quiescent current, making it ideal for battery-powered systems.
High Node Count: 1/8 unit-load design allows for up to 256 nodes on a single shared communication bus.
Failsafe Receiver: Internal circuitry ensures a logic-high output when inputs are open, shorted, or the bus is idle, preventing false data triggers.
Key Points
It is a direct “drop-in” upgrade for the older, industry-standard SN75176 footprint but with significantly lower power consumption.
The device includes thermal shutdown protection to prevent damage if a bus fault causes excessive current draw and heating.
Designed with controlled transition times, it reduces EMI and minimizes reflections on long or improperly terminated cables.
- The “DR” suffix indicates the part is supplied in a Tape & Reel format, optimized for high-speed automated assembly.
Specifications
| Parameter | Detail |
| Supply Voltage (Vcc) | 4.5V to 5.5V (5V Nominal) |
| Data Rate (Max) | 200 kbps |
| Common-Mode Range | -7V to +12V |
| Receiver Hysteresis | 30 mV (Typical) |
| ESD Protection (Bus) | ±15 kV Human Body Model |
| Standby Current | < 1 µA |
| Operating Temp | -40°C to +85°C (Industrial Grade) |
| Package / Case | 8-SOIC (D Package, 3.90mm Width) |












































