-
- 6061 T6 Aluminum Alloy applied, CNC processed.
- Applicable to motors of 4MM motor shaft and 12mm installation pitch.
- Turn CCW prop adapter counter-clockwise to lock. Turn CCW prop adapter clockwise to release.
Tarot quick release CCW prop adapter/Black
₹400.00 excl. GST -
Product Description
- 6061 T6 Aluminum Alloy applied, CNC processed.
- Applicable to motors of 4MM motor shaft and 12mm installation pitch.
- Turn CCW prop adapter counter-clockwise to lock. Turn CCW prop adapter clockwise to release.
Tarot quick release CW prop adapter/Black
₹400.00 excl. GST -
Sale
- Sensors: Accelerometer, Gyroscope, Compass, Barometric Pressure Sensor
- Power input voltage/rated input current: 4.1-5.7 V / 2.5 A
- Power rated output/input power: 14 W
- USB port input voltage/rated input current: 4-5.7 V / 250 mA
- Servo rail input voltage: 3.3 V / 5 V
- Not waterproof. External waterproof protection is needed
- Operation Temperature: -10 °C / 55 °C
- Cube Orange+ Housing Material: CNC Aluminum Alloy
- ADSB Carrier Board Housing Material: ABS Molding
Pixhawk Cube Orange+ standard set with ADS-B carrier board
₹32,500.00 excl. GST -
Description: Applicable to TAROT Gimbal Shock Absorbers TL68A07 Silicone material applied Hollow design, stepped surface which increase contact area. Installing between installation plate and damping plate is suggested. Shore hardness: 25 HA Specification: GOPRO Gimbal Damper x 4 (14 x 13 x 1.2) 0.9g
Gimbal Rubber Damper TL68A11 (4 pcs)
₹412.00 excl. GST -
- Faster H7 SOC with 1MB ram. (STM32H757)
- Upgraded triple redundant IMU sensors.
- Two sets of IMU are vibration-isolated mechanically, reducing the effects of frame vibration.
- Temperature-controlled IMUs, allowing optimum working temperature of IMUs.
- Entire flight management unit (FMU) and inertial management unit (IMU) housed in small form factor (cube).
- Manufacturers can design their own carrier boards to suit their specific needs now and in the future.
- CubePilot carrier board compatible. All inputs and outputs go through a 80 pin DF17 connector, allowing plug-in solution for manufacturers of commercial systems.
The Cube Orange+ (IMU V8)
₹20,450.00 excl. GST -
The Here+ RTK is centimeter level GNSS position system designed for the pixhawk 2. Using integrated real time kinematics (RTK) give you centimeter accurate positioning through concurrent reception of up to 3 GNSS at the same time (GPS, Galileo, GLONASS, BeiDou).Here+ is one of the smallest, lightest and most power efficient RTK module available on the market. In addition to the size and cost advantage, this module has an industry leading navigation sensitivity of -167dBm.
Here+ Base RTK Module
₹14,500.00 excl. GST -
Multi-band RTK GNSS receiver with centimeter precision
For surveying, mapping and navigation. Comes with a mobile app Baseline up to 100 km Update rate 10 HzEmlid RS2 GNSS Receiver – Base
₹198,000.00 excl. GST -
Multi-band RTK GNSS module for precise navigation and UAV mapping
GNSS
GPS/QZSS, GLONASS L1, L2; BeiDou B1, B2; Galileo E1, E5Long range radio
External LoRa radio module: 868/915 MHz, range up to 8 km. Sold separately.Package includes
– Reach M2 – Micro-USB cable – JST-GH 6-pin to jumper pin cable – JST-GH 5-pin to jumper pin cableEmlid Reach M2 RTKPPK GNSS Module – Rover
₹60,500.00 excl. GST -
SMA High Performance Helical spiral GPS L1/L2, Glonass G1/G2/G3, Beidou B1I/B1C/B2i/B2b, Galileo E1/E5B IP67 active Antenna
Multiband GNSS Helical Antenna with L1/L2 bands
₹14,500.00 excl. GST -
This is a 2m reel of the new ProfiLED. These are still a developer only feature at the moment.
ProfiLED Module
₹7,200.00 excl. GST -
- ● Dual power inputs (redundant power with automatic switch to the second power source when first one fails)
- ● Easy to install on drone (see the mounting pattern above)
- ● Power distribution & voltage protection (providing current to each connector)
- ● Motor PWM signal distribution (up to 8 motors - distributed on corners)
- ● Standard 2.54mm servo PPM/S.BUS/Spectrum RC input (+5v/+3.3v selectable power from carrier board)
- ● AUX VCC pins are connected together. This allows powering the AUX rail externally.
MINI CARRIER BOARD AND PDB COMBO
₹11,240.00 excl. GST -
50A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-050U.
MH001: PL-050 Sensor board / 2x 10cm 12AWG / With CFK Enclosue
₹3,999.00 excl. GST -
Out Of Stock
Five multispectral bands at 1.6 MP each
- Blue (475 nm center, 32 nm bandwidth)
- Green (560 nm center, 27 nm bandwidth)
- Red (668 nm center, 14 nm bandwidth)
- Red edge (717 nm center, 12 nm bandwidth)
- Near-IR (842 nm center, 57 nm bandwidth)
Micasesne RedEdge P Multispectral Camera Kit
₹850,000.00 excl. GST -
Overview
HerePro is a professional High Precision Multi-band RTK Navigation module. It supports various GNSS options such as BeiDou, Galileo, GLONASS, GPS, QZSS. Connecting 2 HerePro modules, as base and rover respectively, can complete a precise Multi-band Multi-GNSS RTK system. The HerePro rover and base are identical in both software and hardware. Parameter setting is the only distinction. HerePro uses multi-frequency DGNSS signals with advanced algorithms to converge on an RTK Fix in seconds, achieving more reliable centimeter level positioning.HerePro without iStand
₹67,600.00 excl. GST -
Out Of StockThe mini carrier board for the Pixhawk Cube autopilot. This item comes standalone with no additional cables.
Mini Carrier Board
₹7,500.00 excl. GST