-
- Input and output is protected by Panasonic FC / FM capacitors.
- Input 4-14S LiPo / max. 60V .
- Output 5.3V / 3A -> +/- 0.05V.
Mauch 084: 4-14S BEC (HS series)
₹3,900.00 excl. GST -
Mauch 083: 2-6S Backup BEC (HS) for Pixhawk
₹2,260.00 excl. GST -
- 200A – Current measurement sensor board, based on Allegro Hall Sensor ACS-200U.
- This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section.
Mauch 076: HS-200-HV ,200A Sensor
₹4,450.00 excl. GST -
- 200A – Current measurement sensor board, based on Allegro Hall Sensor ACS-200U.
- The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry… etc.
Mauch 075 : HS-200-LV , 200A Sensor
₹4,450.00 excl. GST -
- 100A – Current measurement sensor board, based on Allegro Hall Sensor ACS-100U.
- This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section.
Mauch 074: HS -100-HV , 4-14S Sensor
₹4,300.00 excl. GST -
- 100A – Current measurement sensor board, based on Allegro Hall Sensor ACS-100U.
- This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section
Mauch 073: HS-100-LV Sensor
₹4,300.00 excl. GST -
- Power-Cube 3 “V3” with 3 outputs 2x 5.3V / 10A + 1x 12.0V / 10A
- Input voltage 4-14S, max. 60V
Mauch 053: Power Cube-3/ V3 (PC 3/V30)
₹25,000.00 excl. GST -
This cable is for the PL-Series BEC’s to connect to Cube/Pixhawk 2.1 or any other flight controller with a 6pin Molex CLIK-Mate2.0 connector.
Mauch 042: PL – FC cable for Cube / Pixhawk2.1
₹550.00 excl. GST -
Connects a Sensor Board to the SEN. port on a PL BEC, a Sensor Hub X2, a Sensor Hub X8, or a Power-Cube You can also use this cable to retrofit your own BEC Molex CLIK-Mate 1.25mm 4p on both ends / L = 150mm
Mauch 040: PL Sensor Cable
-
025: PL 4-14S HYB-BEC / 4F 1x 024: PL 4-14S HYB-BEC / 2x 5.3V / 5.0V / 1x 12.0V / 3A 1x 040: PL – Series sensor cable / L=150mm 1x 050: Backup cable for Pixhawk 2.1 / L=150mm 1x 5.0V output cable (red/black) one site Molex Clik-Mate 1.25mm-4p, the other site open. / L = 150mm 1x 12.0V output cable (white/black) one site Molex Clik-Mate 1.25mm-4p, the other site open. / L = 150mm 1x Enclosure 59mm x 87mm x 13mm / 72g (without cables
Mauch 025: PL 4-14S HYB-BEC / 2x 5.3V / 1x 5.0V / 1x 12.0V
₹20,196.00 excl. GST -
Mauch 024: PL 4-14S HYB-BEC / 2×5.3V / 1×12.0V
₹13,900.00 excl. GST -
Mauch 022: PL 4-14S HYB-BEC / 2x 5.3V
₹10,000.00 excl. GST -
Output 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current. . Delivery in PP box: 55 x 55 x 20mm . 1x 021: PL 4-14S HYB-BEC / 1x 5.3V / 3A . 1x 040: PL – Series sensor cable / L=150mm
MAUCH 021: PL 4-14S HYB-BEC / 1x 5.3V For UAV /Drones
₹5,800.00 excl. GST -
Mauch 017: PL 4-6S BEC 2×5.35V 1×12.0V with CFK enclosure
₹7,300.00 excl. GST