-
Sale
- Input: 8-60V DC (3-12S LiPo)
- BEC 5V, 5A cont. 6A burst
- BEC 12V, 4A cont. 5A burst
- LDO 3.3V, 500mA cont. PDB 4x70A cont. Total 440A burst
- High Precision Current-sense 440A
- Switchable 12V output
- 1K:20K Battery voltage divider
- 50 55 6mm, 21g
- Mounting holes 30.5mm Dia.3mm
- JST-SH-8pin connector for Flight controllers
Matek PDB FCHUB 12S XCLASS V2
₹2,133.00 excl. GST -
Sale
- CAN1: interface connected to K++ flight control
- 12V-CAN: Output voltage 12V; can be connected to ground radar, obstacle avoidance radar, RTK, etc.
- 12V: Output voltage 12V; interface XT30
JIYI CAN HUB 12 for K++ and K3APro
₹6,399.00 excl. GST -
- 200A - Current measurement sensor board, based on Allegro Hall Sensor ACS-250U.
- The voltage reading of the LiPo is optimized for up to 14S LiPo packs.
- This Sensor board needs a power supply. So please select the matching BEC according to your preference from the BEC section.
- The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry... etc.
- Connected to the sensor are 2x10cm AWG10 wire (red) as a standard.
-
The board comes with a 10cm connection cable (DF-13-6p <-> DF-13-6p) to the FC. If you need a customized cable in different lengths, then please order it separately.
Mauch MH076: HS-200-HV Sensor Board / 2x 10cm 10AWG
₹4,200.00 excl. GST -
Out Of Stock
- Input: 9 27V (3~6s LiPo)
- Input TVS protection
- PDB: 4x30A (Max.4x46A)
- BEC 5V 1.5A(2A Max.)
- BEC 10V 1.5A(2A Max.)
- Current Sensor 184A
- Current Scale(1/10th mV/A): 179
- 46x36x4mm, 9g
- Mounting holes 30.5mm 3mm
MATEK FCHUB-6S W/ CURRENT SENSOR 184A, BEC 5V & 10V
₹1,450.00 excl. GST -
This is a 2m reel of the new ProfiLED. These are still a developer only feature at the moment.
ProfiLED Module
₹7,200.00 excl. GST