- “SIYI UniRC 7 Pro Dual Frequency Smart controller” already exists in your wishlist
-
Skydroid H12 Inbuild Display Remote Control with camera
₹29,100.00 excl. GST -
- Multiply the Efficiency With Duo
- Multi-purpose for Most Chemistries With Generic XT60
- Versatile With the Addition of Agm and Cold Modes
- Optimized Operating Software
- Intuitive Operation
- Terminal Voltage Control(TVC)
- Portable With a Handle
- Universal-Voltage Input
- Comply with safety and EMC regulation
SKYRC T200 1-6S Dual Balance Charger
₹8,727.00 excl. GST -
- Model: T Motor P15*5 Prop-2PCS/PAIR
- ?Thrust Limitation (Kg): 6
- Optimum RPM: 5200-7000
- Material: CF+Epoxy
- Working Temperature Range (?C): 40?- 65?c
T Motor P15*5 Prop-2PCS/PAIR
₹5,149.00 excl. GST -
- Product: Drone Propeller
- Material: carbon fiber
- Size: 18inch
- Weight: 13g
- 2 Blades Integrated
T Motor P18*6.1 Propeller for motor
₹6,699.00 excl. GST -
- DC Vibration Motor
- Rotation:? CW/CCW
- Voltage: 3V DC
- Load speed: 12,000rpm
DC Vibration Motor,7 mm Dia. , 25mm Length
₹89.00 excl. GST -
- Wide range, as far as 180m.
- Multi-interface compatibility, able to be used in many fields.
- IP67 high-strength bodywork and high reliability.
- Small in volume and easy to be integrated.
- High-speed measuring up to 10KHz, high repeated accuracy.
- Excellent highlight interference, able to be used outdoors.
Benewake TF03 180M Long Distance Laser Lidar/Rangefinder for Drones, UAV UAS Robots.
₹22,889.00 excl. GST -
TFMini-S Micro LiDAR Distance Sensor for Drones UAV UAS Robots (12m) UART
₹2,799.00 excl. GST -
- Input and output is protected by Panasonic FC / FM capacitors.
- Input 4-14S LiPo / max. 60V?.
- Output 5.3V / 3A -> +/- 0.05V.
Mauch 084: 4-14S BEC (HS series)
₹3,900.00 excl. GST -
- Power-Cube 3 ?V3? with 3 outputs 2x 5.3V / 10A + 1x 12.0V / 10A
- Input voltage 4-14S, max. 60V
Mauch 053: PC3 / V3 Sensor
₹25,000.00 excl. GST -
Mauch 024: PL 4-14S HYB-BEC / 2×5.3V / 1×12.0V
₹13,999.00 excl. GST -
- This sensor hub allows to connect two PixHawk Mauch current sensors in parallel in order to add their current capacities.
- The current of both sensors is summarized before reaching the flight controller while the voltage measurement of the LiPo packs are collected from both sensors and passed through the hub to the flight controller.
- The main purpose of this hub is to replace existing protection circuits and to monitor that both paralleled LiPos are supplying the same current to the system.
- Thanks to Mauch Sensor Hub X2, you can spot early when a LiPo starts to fail, way before this situation is irreversible.
- In case of difference in current is of +/- 15%, the alarm output goes ON in order to indicate the fault. The pilote should then land immediately in order to check the batteries.
Mauch 010: PL Sensor Hub X2-V2 with CFK enclosure for UAV/DRONES
₹5,050.00 excl. GST -
Mauch 003: PL-200 Sensor Board with CFK enclosure
₹4,590.00 excl. GST -
- Easy to use
- Good quality product
- Holder Type: AS150U plug holder, one piece included.
- Compatibility: Designed to be compatible with all drone frames.
- Purpose: Intended to secure or manage AS150U plugs, commonly used for power connections or other related electrical components in drone systems.
EFT Plug Holder AS150U/Compatible with All Drone Frames (1pcs)
₹489.00 excl. GST -
- Display? 4.3-inch TFT full-color touch display
- Transmission frequency:2.400GHz to 2.480GHz
- Weight:? 750g (without battery)
- Working Current: 400mA
Radiomaster TX16S MKII 2.4GHz Radio controller ? 4IN1 Version
₹24,999.00 excl. GST -
- Item: BOXER Radio
- Display: 128*64 Monochrome LCD display
- Voltage range: 6.6-8.4V DC
- Frequency: 2.400GHz-2.480GHz
- Supported protocols: CC2500
Radiomaster Boxer Radio Controller (M2) CC2500 Version
₹9,522.00 excl. GST -
G-004 JR twisted Extension wire 22AWG L=30CM cable
₹125.00 excl. GST










































