6S 3P 12600 mAh Li-ion Battery Pack ₹15,120.00
Mauch 040: PL Sensor Cable ₹500.00
SIYI A8 mini Ultra HD 6X Digital Zoom Gimbal Camera
₹25,999.00 excl. GST
- Brushed DC Vibration Motor
- Rated Voltage: 3.0VDC
- Operation Voltage (VDC): 2.0 to 3.6
- Rotation Direction: CW/CCW
Brushed DC Vibration Motor, 7mm Dia. , 25mm Length
₹119.00 excl. GST
- DC Vibration Motor
- Rotation: CW/CCW
- Voltage: 3V DC
- Load speed: 12,000rpm
DC Vibration Motor,7 mm Dia. , 25mm Length
₹89.00 excl. GST
Mauch 090 – 4-14S HYB-BEC / 12V-3A / 2x 20cm 24AWG
₹3,600.00 excl. GST- Sale
- 200A – Current measurement sensor board, based on Allegro Hall Sensor ACS-200U.
- The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry… etc.
Mauch 075: HS-200-LV , 200A Sensor
Original price was: ₹4,450.00.₹3,533.00Current price is: ₹3,533.00. excl. GSTOriginal price was: ₹4,450.00.₹3,533.00Current price is: ₹3,533.00. excl. GST Add to cart Quick View 
This cable is for the PL-Series BEC’s to connect to Cube/Pixhawk 2.1 or any other flight controller with a 6pin Molex CLIK-Mate2.0 connector.Mauch 042 PL Cable for Pixhawk 2.1 / Mate
₹550.00 excl. GST- Sale
Mauch 024: PL 4-14S HYB-BEC / 2×5.3V / 1×12.0V
Original price was: ₹13,900.00.₹10,744.00Current price is: ₹10,744.00. excl. GSTOriginal price was: ₹13,900.00.₹10,744.00Current price is: ₹10,744.00. excl. GST Add to cart Quick View - Sale
- This sensor hub allows to connect two PixHawk Mauch current sensors in parallel in order to add their current capacities.
- The current of both sensors is summarized before reaching the flight controller while the voltage measurement of the LiPo packs are collected from both sensors and passed through the hub to the flight controller.
- The main purpose of this hub is to replace existing protection circuits and to monitor that both paralleled LiPos are supplying the same current to the system.
- Thanks to Mauch Sensor Hub X2, you can spot early when a LiPo starts to fail, way before this situation is irreversible.
- In case of difference in current is of +/- 15%, the alarm output goes ON in order to indicate the fault. The pilote should then land immediately in order to check the batteries.
Mauch 010: PL Sensor Hub X2-V2 with CFK enclosure for UAV/DRONES
Original price was: ₹5,050.00.₹3,999.00Current price is: ₹3,999.00. excl. GSTOriginal price was: ₹5,050.00.₹3,999.00Current price is: ₹3,999.00. excl. GST Add to cart Quick View - Sale
Mauch 003: PL-200 Sensor Board with CFK enclosure
Original price was: ₹4,590.00.₹4,099.00Current price is: ₹4,099.00. excl. GSTOriginal price was: ₹4,590.00.₹4,099.00Current price is: ₹4,099.00. excl. GST Add to cart Quick View 
- Color: Black
- Cylindrical shape with outer diameter of 20mm (φ20) and a length of 570mm.
- Easy to use
- Good quality product
- Compatible with 22L Granule Spreader
EFT Landing Gear Aluminum Tube φ20*570/Compatible with 22L Granule Spreader (2pcs)
₹1,329.00 excl. GST- Sale
- Color: Black
- Material: Glass-fiber
- Suit for different open-source flight controllers, like APM 2.5/2.6/2.8, KK, MWC, and Pixhawk 2.4
- Package Weight: 24 gm.
Anti-Vibration Shock Absorber for PixHawk
Original price was: ₹399.00.₹210.00Current price is: ₹210.00. excl. GST 
Hot shoe adapter for Reach M2 and M+. Wires the flash sync pulse from camera to Reach for precise time stamping of each picture. Necessary for PPK workflow. Designed to work with any camera with hot shoe connector, tested to work with Sony, Canon, and Nikon.Not compatible with the original, Edison-based, Reach module.Emlid Hot Shoe Adapter
₹4,900.00 excl. GST
- Brand: EMAX
- Model: ES08MA II Servo
- Operating Voltage: 4.8V~6.0V
- Operating Current: 200mA/60º
- Operating Speed: 0.12sec/60º at 4.8V; 0.10sec/60º at 6V
- Torque: 1.6/2.0 kgf.cm 20.8
EMAX ES08MA II 12g Mini Metal Gear Analog Servo
₹900.00 excl. GST
- CubePilot Herelink Directional Antenna
- Features a replacement antenna
CubePilot Herelink Directional Antenna
₹4,100.00 excl. GST
