Texas Instruments SN65HVD3082EDR – 5V Half-duplex RS-485 Transceiver ESD Protection 8-Pin SOIC 114.00 excl. GST
Description

Texas Instruments SN65HVD3082EDR – 5V Half-duplex RS-485 Transceiver ESD Protection 8-Pin SOIC

The Texas InstrumentsSN65HVD3082EDR is a low-power, half-duplex RS-485 transceiver designed to operate reliably in harsh, electrically noisy industrial environments. It translates standard logic signals into the differential signaling required for the RS-485 and RS-422 protocols, allowing for data transmission over long cables (up to 1200+ meters). This specific “E” variant features enhanced 15kV ESD protection on the bus pins and integrated failsafe circuitry to ensure a stable logic state even if the bus is idle, open, or shorted. The SN65HVD3082EDR is an industry-standard choice for power-sensitive networks like utility meters and building automation.

Features
  • Half-Duplex Communication: Optimized for 2-wire networks where nodes take turns transmitting and receiving data.

  • Superior ESD Protection: Bus pins are rated for up to ±15kV (HBM), reducing the need for external protection components in most designs.

  • Low Power Modes: Features an ultra-low 1nA shutdown mode and 0.3mA active quiescent current, making it ideal for battery-powered systems.

  • High Node Count: 1/8 unit-load design allows for up to 256 nodes on a single shared communication bus.

  • Failsafe Receiver: Internal circuitry ensures a logic-high output when inputs are open, shorted, or the bus is idle, preventing false data triggers.

Key Points
  • It is a direct “drop-in” upgrade for the older, industry-standard SN75176 footprint but with significantly lower power consumption.

  • The device includes thermal shutdown protection to prevent damage if a bus fault causes excessive current draw and heating.

  • Designed with controlled transition times, it reduces EMI and minimizes reflections on long or improperly terminated cables.

  • The “DR” suffix indicates the part is supplied in a Tape & Reel format, optimized for high-speed automated assembly.
Specifications
ParameterDetail
Supply Voltage (Vcc)4.5V to 5.5V (5V Nominal)
Data Rate (Max)200 kbps
Common-Mode Range-7V to +12V
Receiver Hysteresis30 mV (Typical)
ESD Protection (Bus)±15 kV Human Body Model
Standby Current< 1 µA
Operating Temp-40°C to +85°C (Industrial Grade)
Package / Case8-SOIC (D Package, 3.90mm Width)
Additional Information
Weight72.6 g
Dimensions4.9 × 3.91 × 3.2 cm
Unit of MeasurementPiece
Country of OriginMexico
ManufacturerTexas Instruments (TI)
Manufacturer Address12500 TI Boulevard, Dallas, Texas 75243, USA