-
Mauch 090 ? 4-14S HYB-BEC / 12V-3A / 2x 20cm 24AWG
₹3,600.00 excl. GST -
- 200A?? Current measurement sensor board, based on Allegro Hall Sensor ACS-200U.
- The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry? etc.
Mauch 075: HS-200-LV , 200A Sensor
₹4,450.00 excl. GST -
Out Of StockConnects a Sensor Board to the SEN. port on a PL BEC, a Sensor Hub X2, a Sensor Hub X8, or a Power-Cube You can also use this cable to retrofit your own BEC Molex CLIK-Mate 1.25mm 4p on both ends / L = 150mm
Mauch 040: PL Sensor Cable
₹500.00 excl. GST -
- SVMFG M3001X - DF13 4-14S HYB BEC / 5.30V DF-13-4P
- 4-14S LiPo (Max 60V)
- 5.35V at 3A stable power
- DF-13-4P for seamless sensor hub integration
SVMFG M3001X – DF13 4-14S HYB BEC
₹3,040.00 excl. GST -
Mauch 060 ? Power Cube to Pixhawk 2.1 Cable
₹649.00 excl. GST -
Mauch 043 ? PL ? FC cable for JST-GH 6pin
₹699.00 excl. GST -
- 200A- Current measurement sensor board, based on Allegro Hall Sensor ACS-250U.
- The voltage reading of the LiPo is optimized for up to 14S LiPo packs.
- This Sensor board needs a power supply. So please select the matching BEC according to your preference from the BEC section.
- The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry... etc.
- Connected to the sensor are 2x10cm AWG10 wire (red) as a standard.
-
The board comes with a 10cm connection cable (DF-13-6p <-> DF-13-6p) to the FC. If you need a customized cable in different lengths, then please order it separately.
Mauch MH076: HS-200-HV Sensor Board / 2x 10cm 10AWG
₹4,200.00 excl. GST -
- Weight: 2.6kg
- Maximum torque: 300 N.cm
- Input voltage: DC 12V~15V
- Average power consumption: 15W
- Working temperature: -20~60?
- IP level: 65
Taisync’s ViuTracker G1
-
Max Voltage 12S Capacitance 2800uF Type Electrolytic Current Rating (PCB) 250A Voltage ripple reduction Yes
Reflex Drive Capacitor CAP BANK
₹2,000.00 excl. GST




































