TATTU 16000MAH 6S1P 15C LiPo Battery Pack ₹15,000.00
SIYI ZT30 Four-Sensor Optical Pod ₹13,049.00
Vector Technics 6015 PRO 210KV Motor ₹15,399.00
axl PDB 400A ₹19,799.00
MATEKS Power Distribution Board-HEX 12S
⚠️ Due to an increase in USD prices, product prices have changed. Order now to avail special discounts.
₹1,668.00 excl. GST
On Preorder
M.R.P.: ₹1,751.40 Incl. GST
MATEKSYS PDB-HEX 2-12S PDB w/ BEC
Matek's latest HEX-PDB is capable of handling high power draws necessary to push UAV's or X-Class drones.
Description
About this product
Matek’s HEX-PDB 12S is capable of handling high power draws necessary to push UAV’s or X-Class drones. Capable of providing power for a hexacopter or quad this PDB is capable of handling 140A continuous current and 264A burst current.
Has both 30×30 and 20×20 mounting patterns.
Specifications
PDB
- Input voltage range: 6~60V (2~12S LiPo)
- PDB/current sense resistor: 140A cont, 264A burst.
- ESC power pads: 60A cont. 100A burst
- 6x ESC power /signal/ telemetry pads
- Current Senor: 264A,? 3.3V ADC
- Current Scale 125(INAV/BF),? BATT_AMP_PERVLT? 80 (ArduPilot)
JST-SH-8P Connector and Pads
- Vbat: Battery voltage
- G: ground
- Curr: current signal
- Tlm: Duplicates Tlm pads for ESC telemetry
- S1/S2/S3/S4/S5/S6: ESC signal
- Vx: Regulator output
BEC Vx output (5V default)
- Vx= 5V by default, ? Continuous 5 Amps
- Bridge 9V jumper,? Vx= 9V,? Continuous 4 Amps,? Max.5A
- Bridge 12V jumper,? Vx= 12V, Continuous 4 Amps,? Max.5A
- Output Short-circuit tolerant (1 seconds)
- Overcurrent protection & self-recovery
Voltage divider
- 1K:20K resistors
- Output 1/21 Vbat voltage
Physical
- Mounting: 30.5 x 30.5mm, 20 x 20mm, ?3mm
- Dimensions: 49 x 40 x 6 mm
- Weight: 12g
Including
- 1 x PDB-HEX 2-12S PDB w/ BEC
- 1 x Rubycon ZLJ 63V 390uF
- 1 x JST-SH1.0_8pin cable, 5cm
- 2 x JST-SH1.0_8pin connectors
