- Brushed DC Vibration Motor
- Rated Voltage: 3.0VDC
- Operation Voltage (VDC): 2.0 to 3.6
- Rotation Direction: CW/CCW
Brushed DC Vibration Motor, 7mm Dia. , 25mm Length
₹119.00 excl. GST
- Wide range, as far as 180m.
- Multi-interface compatibility, able to be used in many fields.
- IP67 high-strength bodywork and high reliability.
- Small in volume and easy to be integrated.
- High-speed measuring up to 10KHz, high repeated accuracy.
- Excellent highlight interference, able to be used outdoors.
Benewake TF03 180M Long Distance Sensor
₹22,889.00 excl. GST
TFMini-S Micro LiDAR Distance Sensor for Drones UAV UAS Robots (12m) UART
₹2,799.00 excl. GST
- 200A?? Current measurement sensor board, based on Allegro Hall Sensor ACS-200U.
- The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry? etc.
Mauch 075: HS-200-LV , 200A Sensor
₹4,450.00 excl. GST
- Power-Cube 3 ?V3? with 3 outputs 2x 5.3V / 10A + 1x 12.0V / 10A
- Input voltage 4-14S, max. 60V
Mauch 053: PC3 / V3 Sensor
₹25,000.00 excl. GST
Mauch 024: PL 4-14S HYB-BEC / 2×5.3V / 1×12.0V
₹13,999.00 excl. GST
- This sensor hub allows to connect two PixHawk Mauch current sensors in parallel in order to add their current capacities.
- The current of both sensors is summarized before reaching the flight controller while the voltage measurement of the LiPo packs are collected from both sensors and passed through the hub to the flight controller.
- The main purpose of this hub is to replace existing protection circuits and to monitor that both paralleled LiPos are supplying the same current to the system.
- Thanks to Mauch Sensor Hub X2, you can spot early when a LiPo starts to fail, way before this situation is irreversible.
- In case of difference in current is of +/- 15%, the alarm output goes ON in order to indicate the fault. The pilote should then land immediately in order to check the batteries.
Mauch 010: PL Sensor Hub X2-V2 with CFK enclosure for UAV/DRONES
₹5,050.00 excl. GST
- Easy to use
- Good quality product
- Holder Type: AS150U plug holder, one piece included.
- Compatibility: Designed to be compatible with all drone frames.
- Purpose: Intended to secure or manage AS150U plugs, commonly used for power connections or other related electrical components in drone systems.
EFT Plug Holder AS150U/Compatible with All Drone Frames (1pcs)
₹489.00 excl. GST
- Item: RM 4IN1 Module
- Operational voltage: 4.5-8.4V
- Operational frequency: 2.4G ISM band (2400mHz ? 2483mHz)
- RF Chipsets: CC2500, NRF24L01, A7105 and CYRF6936
- Operational current:?100mA
- RF Gain: +20dBm
RadioMaster 2.4GHz RM 4IN1 Module
₹7,240.00 excl. GST
- Display? 4.3-inch TFT full-color touch display
- Transmission frequency:2.400GHz to 2.480GHz
- Weight:? 750g (without battery)
- Working Current: 400mA
Radiomaster TX16S MKII 2.4GHz Radio controller ? 4IN1 Version
₹24,999.00 excl. GST
? Prop Strength X2 ? Ultimate durability, longer life time ? Energy-Snubber ? Caution: Polymer props for coaxial configuration are under testing. Please DO NOT run polymer props on coaxial framesT-Motor MF2211 Propeller 2pcs/pair
₹6,199.00 excl. GST- ? Prop Strength X2 ? Ultimate durability, longer life time ? Energy-Snubber ? Caution: Polymer props for coaxial configuration are under testing. Please DO NOT run polymer props on coaxial frames
T-Motor MF2009 Propeller 2pcs/pair
₹5,999.00 excl. GST 
G-004 JR twisted Extension wire 22AWG L=30CM cable
₹125.00 excl. GST
- Color: Black
- Material: Glass-fiber
- Suit for different open-source flight controllers, like APM 2.5/2.6/2.8, KK, MWC, and Pixhawk 2.4
- Package Weight:?24 gm.
Anti-Vibration Shock Absorber for PixHawk
₹399.00 excl. GST
Hot shoe adapter for Reach M2 and M+. Wires the flash sync pulse from camera to Reach for precise time stamping of each picture. Necessary for PPK workflow. Designed to work with any camera with hot shoe connector, tested to work with Sony, Canon, and Nikon.Not compatible with the original, Edison-based, Reach module.Emlid Hot Shoe Adapter
₹4,900.00 excl. GST
2
Shopping Cart (2)
Shop
